Sunday, October 30, 2011

Raven-PTU

For this tutorial, you’ll need a working knowledge of PSP.
I’m using PSP 9 but any version should work. 
This tutorial is my own and any resemblance to any other is purely coincidental.
Supplies for this tutorial:
PSP (any version)
Scrap kit of choice.
I’m using the PTU kit: Raven
Tube/Image-I used Keith Garvey
You MUST have a license to use these tubes! Do NOT use w/o a license!
Mask 10 here: HERE

Open new image 800*600
Open a frame of choice from your kit
Resize if needed
Copy and paste as new layer in your canvas
Copy and paste your tube
Add drop shadow
Duplicate your frame
Move the copy over top of your tube
Erase the parts covering your tube where it shouldn’t
Erase any parts of your tube hanging out under the frame
Select the bottom frame
Use your magic wand & select the inside of your frame
Selections
Modify
Expand by 4
Copy a paper from your kit
Paste as new layer
Selections
Invert
Delete
Select none
Move below your bottom frame layer
Add drop shadow to you bottom frame
Now you can add the elements you want included in your tag
Resize each one if needed
Copy, paste, & place as desired.
Add drop shadow to each one you add.
Use your imagination & make this tag your own!
I used the following:
Black wings
Moon
Cloud
Tree
Black netting
Butterfly
Lantern
Ribbon
Black leaves
Flower cluster
Now copy another paper from your kit
Paste as new layer under all other layers
Apply your mask to this paper
Merge visible
Crop down using your rectangular selection tool
Resize
Add your © info and your name/text
Save and enjoy your new tag!

Sunday, October 23, 2011

-Sweet Witch-PTU

For this tutorial, you’ll need a working knowledge of PSP.
I’m using PSP 9 but any version should work.

This tutorial is my own and any resemblance to any other is purely coincidental.

Supplies for this tutorial:

PSP (any version)
Scrap kit of choice.
I’m using the PTU kit: chills & Thrills By Jens Sweet Temptations
Be sure to check out her blog: http://jenssweettemptations.blogspot.com/ 
Tube of choice: This cutie is included in the kit.
Let’s begin:
Open a new work space-800x600-we’ll crop later.
Open the double frame element
Copy and paste as new layer
Flip it on its side
Select inside of both circles with your magic wand
Selections
Modify
Expand by 3
Add new rater layer
Flood fill with a color to match your kit.
Move below your frame.
Effects
Texture effects
Weave
Gap size: 1
Width: 4
Opacity: 3
Both weave & gap color: black
Fill gaps: checked
Copy and paste your tube of choice on top of frame layer
Add drop shadow to your tube and frame layers
Now select all other elements you want to include in your tag
I used:
Tree
Black glitter
Pink owl
Leaf glitter
Copy 
Paste
& arrange each element as you see fit in your tag
Add drop shadow to each one you add
Crop down w/ your selection tool
Resize
Add text & © info
Save & enjoy your tag



Saturday, October 22, 2011

-Autumn Friends-PTU

For this tutorial, you’ll need a working knowledge of PSP.
I’m using PSP 9 but any version should work. 
This tutorial is my own and any resemblance to any other is purely coincidental.
Supplies for this tutorial:
PSP (any version)
Scrap kit of choice.
I’m using the PTU kit: Autumn Friends 
Tube/Image-I used this beauty from Zindy
You MUST have a license to use these tubes! Do NOT use w/o a license!
Find them here: HERE
Mask leafy mask here: HERE



Open new image 800*600
Copy a frame from the kit
Paste as new layer
Use your magic wand to click inside of your frame
Add new raster layer
Selections
Modify
Expand by 4
Flood fill w/ a color to match your kit
Select none
Move this below your frame layer
Copy a tree from your kit
Paste as new layer
Move to the side of the frame
Erase any parts hanging beyond the frame
Duplicate
Mirror
Copy the fence from the kit
Paste as new layer
Now copy any other elements you want to use in your tag
I used:
Leaf
Pumpkin
Leaf bundle
Ground 
Copy
Resize
And position as you like in your tag
Make it your own!
Copy and paste your tube
Add drop shadow
Add drop shadows to each element you add as well.
Copy a paper from your kit
Paste at the bottom of all other layers
Apply your mask
Merge visible
Crop
Resize
Add © and any text
save



Friday, October 14, 2011

-Witchy Cutie-PTU

For this tutorial, you’ll need a working knowledge of PSP.
I’m using PSP 9 but any version should work. 
This tutorial is my own and any resemblance to any other is purely coincidental.
Supplies for this tutorial:
PSP (any version)
Scrap kit of choice.
I’m using the PTU kit: The Witches Brew by Angel’s Designz.
You can get her kits here: http://angelsdesignz.blogspot.com/
Tube of choice: I’m using VeryMany
This is a tube you MUST have a license to use.  Don’t use these tubes without a license!
You can find these tubes here: www.picsfordesign.com  


Open your template
Delete the © layer
Select one f the shapes of your template w/ your magic wand
Selections
Modify
Expand by 2
Copy a paper from your kit
Paste as new layer
Selections
Invert
Delete
Select none
Now do those same steps for the other shapes in your template
Fill each w/ a different paper from your kit
Add drop shadow to each layer
Add your tube
Crop how you see fit & whatever works w/ your tag.
Remember, you can always make this tag your own!!
On your big rectangle, you want to add the close up of our tube
Crop it so it fits
Change the blend mode to luminance legacy.
Now you can mirror the tube copy it again
Paste as new layer
crop it as well & change its blend mode.
Now you can add whatever elements from your kit that you want!
I used the following:
Moon
Bats
Glitter splatter
Cat
Broom
Couldron
Orange & black doodle
& the sparkles
Resize, copy & paste each element as you like.
Add drop shadow to each one
Crop down your tag
Merge visible
Resize
Add your © info
Name and any other text you want on your tag
Save & enjoy



-The magic f Fall-PTU

For this tutorial, you’ll need a working knowledge of PSP.
I’m using PSP 9 but any version should work.

This tutorial is my own and any resemblance to any other is purely coincidental.

Supplies for this tutorial:

PSP (any version)
Scrap kit of choice.
I’m using the PTU kit: Autumn Magic By Jens Sweet Temptations
Be sure to check out her blog: http://jenssweettemptations.blogspot.com/ 
Tube of choice: TooshToosh: www.tooshtoosh.com 

Let’s begin:
Open your template
Delete the © layer
Select one of your shapes of your template w/ your magic wand
Selections
modify expand by two
Copy a paper from your kit
Paste as new layer
Selections
Invert
Delete
Select none
Do these same steps for the other shapes in your template
Add drop shadow to each layer
Now we add our tube
Add drop shadow
Now select all the elements you want to use.
Copy each & paste as new layer.
Add drop shadow to each one.
I used:
Leaves
Fence
Branch of leave
Corn
Bow
Cluster of elements (bear, pumpkins, birdhouse, bird)
I duplicated & mirrored most of my elements.
Once you have them all,
Crop your tag down
Resize
Add name/text & © info
Save & enjoy!

Wednesday, October 12, 2011

-Super Star-PTU

For this tutorial, you’ll need a working knowledge of PSP.
I’m using PSP 9 but any version should work. 
This tutorial is my own and any resemblance to any other is purely coincidental.
Supplies for this tutorial:
PSP (any version)
Scrap kit of choice.
I’m using the PTU kit: Star Crazed
You can get her kits here: http://angelsdesignz.blogspot.com/
Tube of choice: I’m using Jose Cano
This is a tube you MUST have a license to use.  Don’t use these tubes without a license!
You can find these tubes here: www.psptubesemporium.com 

Open a new canvas 800x600
Open the striped circle frame
Copy
Paste as new later
Copy a paper from the kit
Select the inside of the frame w/ your magic wand
Selections
Modify
Expand by4
Paste paper as new layers
Selections
Invert
Delete
Select none
Move paper below frame
Copy and paste your close up of your tube over top the frame
Duplicate your frame
Move it over your tube
Use your eraser to erase parts of the frame covering your tube.
Select you tube layer and erase any parts hanging out beyond the frame.
Add drop shadow to your BOTTOM frame layer.
Copy the striped frame circle again
Resize it by about 75%
Paste as new layer & move under all you other layers.
Position it to the left of your main frame.
Duplicate
Mirror
Now fill both of these little frames w/ a paper just like you did the big frame.
Copy and paste your tube’s close up overtop of the paper in the little frames.
Crop your tube so nothing is hanging out
Change the blend mode to your tube to LUMINANCE LEGACY or any one you choose.
Add drop shadow to each of your smaller frames.
Now select any elements you want to include in your tag.
I used the following:
Blue stars
Paint splatter
Yellow flower
Black and blue ribbon
Feather fan
Star sucker
Wire mesh
Sparkles.
Copy each element
Place each where you want them.
I duplicated and mirrored several of the elements I added.
Add drop shadow to each one.
Crop your tag down.
Resize
Add your name/text and your © info.
Save and enjoy your new tag

Old Temps

Older templates can be downloaded HERE
Background created by Sarah-Scrap kit by Just So Scrappy. Powered by Blogger.

CU Licenses

Photobucket Photobucket Photobucket

I ♥

My Blinkies

Photobucket Photobucket Photobucket

-Follow Me!-

Follow Me on Pinterest

My TOU

By downloading any of my items, you agree to the following TOU: All items I provide on this blog are my own creations. Any resemblance to another product is strictly coincidental. Please do not share anything I create! Do not claim as your own. Give credit where it is due! If you use them for challenges, please link back to my blog. If you use them in tutorials, please link back to my blog. If you use any of my creations, I would love to see it!! Feel free to email them to me, anytime & I will display them on my blog!! Blog: http://sarahstagsthings.blogspot.com/ My Email: Smcmanus44@gmail.com Thank you!!